Great Plains V-300F Predelivery Manual - Manual (Page 21)

1/2/2006 148-057Q
19 Assembly
NOTE: At this point in the assem-
bly process, the lift straps may be
removed so that assembly can be
completed.
Openers
Refer to Figure 29 and 30
1. Place forklift under rack and
remove bolts to rack securing
openers. Carefully remove
rack using forklift or other im-
plement.
Refer to Figure 31
2. Once rack is removed
attach opener spring
rods to openers. Se-
cure with pins and cot-
ter pins.
23315
23326
Figure 30
Remove Rack
23314
Figure 31
Opener Springs
Jack
Refer to Figure 28
1. Attach jack to storage stob located on tongue
of drill.
2. Lock jack into position using attached pin.
3. Extend so jack takes weight off of forklift or
other implement.
NOTE: When jack is not in use, place jack on stor-
age stob located on top of frame.
23378
Figure 29
Remove Rack
Figure 28
Jack (In Use)