Great Plains 10 Gallon Stainless Tank Foam Marker Operator Manual User Manual

Page 14

Advertising
background image

Foam Marker

500-033M-A

4/21/2003

12

Tractor Mount Sprayer / Foam Marker
Assembly Instructions and Set-Up

Refer to Figure 4

1.

Mount the foam tank base (1) on the tank bracket
with two 3/8" x 1" long bolts (2), flat washers, and
flange nuts required.

2.

Mount the foam marker box (4) and the foam tank
base (6) on the support brackets with 3/8" x 1" long
bolts and flange nuts required.

3.

Secure the foam tank (5) to the foam tank base (6)
with the hose clamp (7) provided.

4.

Attach a section of the clear hose from the hose
barb on the foam marker box (4) labeled "AIR TANK
IN" to the hose barb on the foam tank (5) that has a
white coupling. In a similar manner, attach a section
of the clear hose from the hose barb on the foam
marker box (4) labeled "FOAM TANK OUT" to the
black coupler on the tank. Attach the hoses with the
hose clamps provided.

5.

Follow the instructions step 5 through step 10 on
page 10 to attach the foam generator cylinders.

Figure 4

Tractor Mount Foam Marker Assembly Illustration

12442

200/300 Gallon 3-Point Mounted
Sprayer / Foam Marker Assembly
Instructions and Set-Up

Refer to Figure 5

1.

Mount the support brackets (1) and (2) on the right
walkboard with 3/8" x 1" long bolts (3), flat washers,
and flange nuts required.

2.

Mount the foam marker box (4) and the foam tank
base (6) on the support brackets with 3/8" x 1" long
bolts and flange nuts required.

3.

Secure the foam tank (5) to the foam tank base (6)
with the hose clamp (7) provided.

4.

Attach a section of the clear hose from the hose
barb on the foam marker box (4) labeled "AIR TANK
IN" to the hose barb on the foam tank (5) that has a
white coupling. In a similar manner, attach a section
of the clear hose from the hose barb on the foam
marker box (4) labeled "FOAM TANK OUT" to the
black coupler on the tank. Attach the hoses with the
hose clamps provided

5.

Follow the instructions step 5 through step 10 on
page 10 to attach the foam generator cylinders.

Figure 5

3-Point Sprayer Foam Marker Assembly Illustration

13264

Advertising