Great Plains 9756PP Operator Manual - Manual (Page 27)

Great Plains Manufacturing, Inc. Maintenance and Lubrication 23
02/17/2014 580-043M
Walking Beam Pivot Bearings
One on each walking beam
Type of Lubrication: Grease
Quantity: Sparingly and check for endplay
If there is a lot of end play take apart, check bearings
and re-pack
All Hinge Points
One on each bearing
Type of Lubrication: Grease
Quantity: Grease every 10 hours, until grease
emerges.
Treader Gang Bearings
One on each bearing
Type of Lubrication: Grease
Quantity: Grease every 50 hours, 2 to 3 pumps. In
heavy conditions grease every 20 hours, 2 to 3 pumps.
100
10
50
41730
43010
43010