Great Plains 9756PP Operator Manual User Manual
Page 3
Great Plains Manufacturing, Inc.
iii
02/17/2014
580-043M
©
Copyright 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014 All rights Reserved
Great Plains Manufacturing, Inc. provides this publication “as is” without warranty of any kind, either expressed or implied. While every precaution has been
taken in the preparation of this manual, Great Plains Manufacturing, Inc. assumes no responsibility for errors or omissions. Neither is any liability assumed for
damages resulting from the use of the information contained herein. Great Plains Manufacturing, Inc. reserves the right to revise and improve its products as
it sees fit. This publication describes the state of this product at the time of its publication, and may not reflect the product in the future.
Trademarks of Great Plains Manufacturing, Inc. include: Singulator Plus, Swath Command, Terra-Tine.
Registered Trademarks of Great Plains Manufacturing, Inc. include:
Air-Pro, Clear-Shot, Discovator, Great Plains, Land Pride, MeterCone, Nutri-Pro, Seed-Lok, Solid Stand,
Terra-Guard, Turbo-Chisel, Turbo-Chopper, Turbo Max, Turbo-Till, Ultra-Till, Verti-Till, Whirlfilter, Yield-Pro.
Brand and Product Names that appear and are owned by others are trademarks of their respective owners.
Printed in the United States of America
Table of Contents
Important Safety Information ......................................1
Safety Decals .................................................................5
Introduction ...............................................................10
Models Covered ...........................................................10
Description of Unit ........................................................10
Document Family......................................................10
Using This Manual........................................................10
Definitions.................................................................10
Owner Assistance ........................................................11
Preparation and Setup ...............................................12
Prior to Going to the Field Checklist.............................12
Hitching Tractor to Plains Plow ....................................13
First Time Field Adjustments........................................15
Side to Side Leveling................................................15
Folding Instructions for 5 or 7 Section Plains Plow ...... 17
General Operation and In-Field Adjustments............... 18
Gauge Wheel Adjustment ........................................ 18
Depth Stop ............................................................... 19
Wheel Arm ............................................................... 19
Treader Adjustment.................................................. 20
Treader Angle Adjustment ....................................... 20
Rear Stand ............................................................... 21
Maintenance and Lubrication ................................... 22
Maintenance ................................................................ 22
Lubrication ................................................................... 22
Appendix..................................................................... 24
PP Specifications and Capacities ................................ 24
Tire Inflation Chart ....................................................... 25
Hydraulic Connectors and Torque ............................... 25
Torque Values Chart .................................................... 26
Warranty ...................................................................... 27
Index............................................................................ 29