Great Plains HD Series Operator Manual - Manual (Page 11)

11
Ordering Flex Harrow Section Parts
Hub Identification
8 Bolt Hub - # 8BH100 – Used on HD Main Axle
6 Bolt Hub - #6BH101 – Used on FF Main Axle
4 Bolt Hub - #4BH102 – Used on FF and HD Wing Spindle
Spindles are weld-in units – Call factory for assistance
Cylinder Identification
3 ½ X 8 – #35X8 - FF Main Lift Cylinders
3 ½ X 16 - #35X16 – HD Main Lift Cylinders 22 ½ ft. through 43 ½ ft.
4 X 16 - #40X16 – HD Main Lift Cylinders 45 ft. through 52 ½ ft.
2X14 - #20X14 – FF & HD Wing Cylinders 22 ½ ft. through 28 ½ ft.
2 ½ X 14 - #25X14 – FF & HD Wing Cylinders 30 ft. through 43 ½ ft.
3 X 14 - #30X14 – HD Wing Cylinders 45 through 52 ½ ft.
Tooth – 6”
U Pull Clamp -
301522
Angle Stop
Plate -
301557
Pull Tab -
302007
Bow Tie Link
- 302014