Great Plains 1205NT Parts Manual - Manual (Page 67)

Revision Comments Part Description Part No. Ref.
Image No. dwg13529
2nd rev. JAW CLUTCH CW EXTENDED 176-040S 1.
Use existing stock; 1st rev. RPBY 176-040S 176-038S 1.
2nd rev. SNAP RING EXT 1 1/4 HEAVY 800-177C 1.
Use existing stock; 1st rev. SNAP RING EXT INVERTED 1-1/4 800-077C 1.
CLUTCH FRICTION WASHER 176-065D 2.
BSHG FLG 1.26IDX1.41ODX.87L 817-111C 3.
2nd rev. CLUTCH DRIVE PLATE LONG - CW 176-078D 4.
Use existing stock; 1st rev. RPBY 176-078D 176-061D 4.
2nd rev. CLUTCJ ARM PLATE 176-080D 5.
Use existing stock; 1st rev. RPBY 176-080D 176-063D 5.
2nd rev. CLUTCH SLIDE PLATE - CW 176-076D 6.
Use existing stock; 1st rev. RPBY 176-076D 176-059D 6.
2nd rev. CLUTCH HUB 1 BORE 176-083D 7.
Use existing stock; 1st rev. RPBY 176-083D 176-073D 7.
SPRING COMP 2 1/16 OD X 4 LG 807-097C 8.
CLUTCH SPRING RETAINER 176-066D 9.
2nd rev. PIN ROLL 3/16X 1 1/2 PLT 805-024C 10.
Use existing stock; 1st rev. RPBY 805-024C 805-172C 10.
11/13/12 - 67 - 150-131P
Table of Contents Part Number Index
Drive
Jaw Clutch
(Applies to 1205NT only)