Great Plains 20P Series Drill Assembly Instructions - Manual (Page 5)

5 4/6/07 Small Seeds Option 133-187M
Great Plains Mfg., Inc.
Assembly
■
Figure 8
Handle and Cover Assembly
19760
19712
Refer to Figure 7
3.
Remove slack in chain (20) by tightening the double
idler spool (8).
Handle Assembly
Refer to Figure 8
1.
Place chain shield (1) over end of small-seeds box
mount (2). Install handle (3) and light assembly (4) us-
ing bolts
removed in step 1. Check that all hardware has been
tightened.
Note: On 20P drills, repeat steps to install drive for right-
hand box.
Figure 7
Tightening Chain