Great Plains UT5052 Parts Manual - Manual (Page 27)

Revision Comments Part Description Part No. Ref.
Image No. dwg00526
PIVOT SPINDLE 2 1/2 X 10 580-191D 1.
SEAL 2.50IDX3.251DX.47T 816-573C 2.
BRG CONE 1.97ID JLM104948 822-226C 3.
BRG CUP JLM104910 822-225C 4.
WALKING BEAM 560-126H 5.
GREASE ZERK 1/4-28 THD FORMING 800-080C 6.
BRG CUP 2.89ODX.58WD #LM501310 822-053C 7.
BRG CONE 1.62IDX.78WD#LM501349 822-048C 8.
WASHER FLAT 7/8 GRD 8 2 1/4 OD 804-193C 9.
WASHER SPINDLE - 7/8 804-055C 10.
PIN COTTER 5/32 X 1 1/2 LONG 805-089C 11.
NUT HEX SLOTTED 7/8-14 PLT 803-029C 12.
GREASE CAP 3.153X1.468X.312 890-886C 13.
Includes items 1 thru 13 WALKING BEAM ASSEMBLY CENTER 560-128L 14.
See pg. 3-11 for parts HUB 8-BOLT SPNDL 2.25X16.5 458 815-226C 15.
Rev. 2 Revision date 6/20/05 HHCS 5/16-18X4 GR8 PLT 802-802C 16.
Rev. 1 Changed to 802-802C HHCS 5/16-18X4 GR5 802-279C 16.
WASHER LOCK SPRING 5/16 PLT 804-009C 17.
NUT HEX 5/16-18 PLT 803-008C 18.
WHEEL 15X8 8 BOLT WHITE 814-222C 19.
TIRE 11LX15 LOAD F 814-226C 20.
Includes items 19 & 20 TIRE/WHL 11LX15 LOAD F 8BLT WH 814-235C 21.
NUT LUG 5/8-18 X 90 DEG PLT 803-219C 22.
12/31/13 - 27 - 576-026P
Table of Contents Part Number Index
Section 3: Transport
Center Walking Beam, 3030 & 5036
(Applies to UT3030, UT5036 only)