Great Plains UT5052 Parts Manual - Manual (Page 35)

Revision Comments Part Description Part No. Ref.
Image No. dwg00528
PIVOT SPINDLE 2X8 1/16 550-015D 1.
SEAL (CR16286) 816-398C 2.
SEAL SLEEVE (CR081071) 816-396C 3.
INNER CONE, JL69349 822-198C 4.
INNER CUP JL69310 822-197C 5.
WALKING BEAM 560-035H 6.
GREASE ZERK 1/4-28 THD FORMING 800-080C 7.
BEARING CUP LM-67010 822-020C 8.
BEARING CONE LM-67048 822-021C 9.
WASHER SPINDLE - 7/8 804-055C 10.
NUT HEX SLOTTED 7/8-14 PLT 803-029C 11.
PIN COTTER 5/32 X 1 1/2 LONG 805-089C 12.
GREASE CAP 2.448X1.12X.25 890-781C 13.
HUB 6-BOLT SPINDLE 2X15 890 815-223C 14.
HUB 6-BOLT SPINDLE 2X16 890 815-224C 15.
PIN CLEVIS 5/16X2 13/16 USABLE 805-324C 16.
PIN COTTER 1/8 X 1 805-363C 17.
WALKING BEAM HUB ASSEMBLY 576-018L 18.
WHEEL 15X8 6 BOLT WHITE 814-221C 19.
TIRE 11L-15 X 8 PLY 814-038C 20.
TIRE/WHL 11LX15 8PLY 6BLT WHT 814-232C 21.
NUT LUG 9/16-18 X 90 PLT 803-061C 22.
NUT LUG 1/2-20X90DEG PLT 13/16 803-017C 22.
12/31/13 - 35 - 576-026P
Table of Contents Part Number Index
Section 3: Transport
Wing Walking Beam Assembly
(Applies to UT3030, UT5036, UT5042, UT5048, UT5052 only)