Great Plains 2S-2600 Installation Instructions - Manual (Page 2)

195-300M 2/22/2005
Great Plains Mfg., Inc.
Point Row Option 2
Assembly Instructions
Hook the drill to a tractor. Move the opener lock
handles to "Field", unfold the drill and lower the
openers to the ground. Place the remote lever in
float position to relieve any residual hydraulic
pressure. Clean the area around the pressure re-
ducing valves by washing or using compressed
air.
Disassembly
Refer to Figure 1
1. Remove hoses (1),(2),(3),(4),(5) and (6) from
bulkhead tee fittings (7).
2. Remove the bulkhead tee fittings (7) from the
drill, and discard.
Figure 1
Original Plumbing
22624
3. Remove hoses (8) and (9) from the tee fitting
(10) on counter balance valve (11).
4. Remove the tee fitting (10) from CBV (10) and
discard.
5. Reinstall hose (8) on elbow fitting (12).
S/N 1216+ January 2005+
S/N DD1215- December 2004-