Great Plains 2S-2600 Installation Instructions User Manual
Page 3
Advertising
2/22/2005
195-300M
Great Plains Mfg., Inc.
3
Installation Instructions
Refer to Figure 2
6.
Remove the mounting bolts for the LH Reduc-
ing Valve (13). Reinstall the bolts, placing six
flat washers (14) against the valve's body to
shim it away from the mounting bracket.
Refer to Figure 3
7.
Remove hose (15) from the back of the RH re-
ducing valve (16). Install tee fitting (17) sup-
plied with the kit.
8.
Remove hose (18) from the tee fitting (19) on
back of LH reducing valve (13) and re-attach it
to tee fitting (17) on the back of the RH reduc-
ing valve (16).
9.
Disconnect Hose (4) from elbow (20). Save
this hose for re-use. Remove and save elbow
(20) from the bottom of the LH reducing valve
(13).
Figure 2
Shimming the Valve
22625
Figure 3
Removing Fittings
22626
Advertising