Great Plains 3SF45 Operator Manual - Manual (Page 3)

4/8/99 0-2
170-062M
INTRODUCTION
Your Great Plains 3-Section Solid Stand Folding Drill is designed to give you many years of depend-
able service. This manual has been prepared to instruct you in the safe and efficient operation of
this machine. Read and study it thoroughly. Follow all instructions and service procedures carefully.
The parts on your 3-Section Solid Stand Folding Drill have been specially designed and should only
be replaced with genuine Great Plains parts. Therefore; should your drill require replacements
parts, purchase them from your Great Plains Dealer.
Space has been provided below for you to record your model number and serial number of your drill.
Be sure to bring this information with you to your dealer when ordering parts or attachments for your
drill.
The following signal symbol and words should be clearly understood! When seen in this manual or
on your equipment, this symbol and words will alert you to the seriousness of a situation. They
should not be ignored or taken lightly.
The
SAFETY ALERT SYMBOL
indicates that there is a potential hazard to personal safety
involved and extra safety precautions must be taken. When you see this symbol, be alert and care-
fully read the message that follows it. In addition to design and configuration of equipment; hazard
control and accident prevention are dependent upon the awareness, concern, prudence and proper
training of personnel involved in the operation, transport, maintenance and storage of equipment.
DANGER: Indicates an imminently hazardous situation which, if not avoided,
will
result in death
or serious injury This signal word is limited to the most extreme situations.
WARNING: Indicates a potentially hazardous situation which, if not avoided,
could
result in
death or serious injury.
CAUTION: Indicates a potentially hazardous situation which, if not avoided,
may
result in minor
or moderate injury. It may also be used to alert against unsafe practices.
SERIAL NUMBER ___________________
MODEL NUMBER ___________________
DATE PURCHASED _________________
!