Great Plains 2520P Assembly Instructions - Manual

© Copyright 2003 Printed
Great Plains Mfg., Inc.
Used with:
Installation Instructions
118-870M
3-Point Precision Seeding System
Baffle Package Option
• 2520P Twin Row Spacing
General Information
When you see this symbol, the subsequent instructions and
warnings are serious - follow without exception. Your life and
the lives of others depend on it!
!!
These instructions explain how to install the Baffle
Package Option. The baffle package kit converts
a 9 1/2" 2520P or an 8"/10"/10"/10" 2520P drill
into a 38" twin row unit.
These instructions apply to:
118-868A 2520P Baffle Package
Manual Update
Refer to the 3-Point Precision Seeding System
operator’s manual for detailed information on
safely operating, adjusting, troubleshooting and
maintaining the 2520P drill. Refer to the parts
manual for part identification.
118-863M Operator’s Manual
118-863P Parts Manual
1/28/2003
Before You Start
Page 3 is a detailed listing of parts included in the
Baffle Package Option. Use this list to inventory
parts received.
Tools Required
• Basic hand tools
Definitions
Right hand and left hand as used in this manual
are determined by facing the direction the drill will
travel while in use.
Assembly Instructions
Refer to Figure 1
1. Using predrilled holes, remove bolt (1) from
the seed tray and replace with eye hook (2),
flat washers (3), lock washer (4) and hex nut
(5) supplied in kit. Assemble the eyebolts in
the same manner for both boxes. There are
four eyebolts per seed tray, one at each end of
tray and two in the center.
Figure 1
Seed Tray
20330