Great Plains NP3000A Predelivery Manual - Manual (Page 26)

22 NP3000 Table of Contents Index Great Plains Manufacturing, Inc.
407-613Q Table of Contents Index 03/31/2011
Install Nurse Tank Hitch
If the implement was ordered without a rear hitch, con-
tinue at “Install SMV Reflector” on page 22.
Refer to Figure 31
For shipping, the hitch mount
is removed.
Install Hitch
4. Select one:
407-304H MOUNT HITCH SHUCK
which should already have the Schuck hitch installed
within it.
5. Select six:
806-016C U-BOLT 5/8-11 X 6 1/32 X 5 3/4
and twelve sets:
804-022C WASHER LOCK SPRING 5/8 PLT
803-021C NUT HEX 5/8-11 PLT
6. Orient the hitch assembly with the red handle
down, and centered on the hitch extension (or if
no hitch extension, on the rear tool bar). Secure with
six U-bolts
, lock washers and nuts .
Install SMV Reflector
Refer to Figure 32
1.
Select one:
407-512D SMV POST 2 1/2 U-BOLT
and two sets:
802-091C HHCS 1/2-13X1 1/2 GR5
804-015C WASHER LOCK SPRING 1/2 PLT
803-020C NUT HEX 1/2-13 PLT
2. With the SMV reflector up and facing rear, mount
the SMV post on the rear face of the wing rest .
Figure 31
Hitch Components
32044
17
47
44
38
1
17
17
47
44
38
17 1
15
47 44 38
Figure 32
Install SMV Reflector
31024
25
43
34
37
97
24
25
34
43
37
97
25 24