Great Plains YP1220 Operator Manual User Manual
Page 53
Advertising
Great Plains Manufacturing, Inc.
Adjustments
49
03/14/2012
401-506M
Refer to Figure 58
To adjust press wheels between staggered to even,
remove
5
⁄
8
in nut
and inside lock washer
. Remove
press wheel, keeping spacer
, outside lock washer
and bolt
with wheel. Move wheel to other mounting
hole and re-secure.
If one press wheel is running in the seed trench or the
wheels are not centered over the seed trench, adjust the
press wheels by adding or removing spacers
Figure 58
Press Wheel Stagger
27464
4
3
2
1
2
2
3
Advertising