Great Plains 1006NT Operator Manual - Manual (Page 24)

706/1006NT
150-285M 1/3/07
22
Parking
Perform the following steps when parking the drill.
Refer to “Storage”, page 32, to prepare for long-
term storage.
1. Park drill on a level, solid area.
2. Lower drill until openers are resting on the
ground.
3. Securely block tires to prevent rolling.
Refer to Figure 10
4. Remove tongue jack from storage stob. Pin
jack on side of tongue. If ground is soft, place
a board or plate under jack.
5. Extend jack until tongue weight is off tractor
drawbar.
6. Unplug hydraulic hoses and wiring harness
from tractor. Do not allow hose ends or har-
ness ends to rest on the ground.
7. Remove hitch bolt and safety chain from trac-
tor drawbar.
Jack storage stob
20481
Figure 10
Jack Storage Position