Great Plains 1006NT Operator Manual - Manual (Page 34)

706/1006NT
150-285M 1/3/07
32
Storage
Store drill where children do not play. If possible,
store the drill inside for longer life.
1. Unload seed box.
2. Thoroughly clean seed and seed-treatment
residue from boxes and feed cups.
3. Remove any dirt and debris that can hold
moisture and cause corrosion.
4. Lubricate and adjust all roller chains.
5. Take special care to oil feed cup drive sprock-
et in its square bore.
6. Lubricate areas noted under “Lubrication”,
page 33.
7. Inspect drill for worn or damaged parts. Make
repairs and service during the off season.
8. Use spray paint to cover scratches, chips and
worn areas on the drill to protect the metal.
9. Disconnect seed hoses from openers. Per-
manent elongation and premature cracking of
hoses may occur if stored connected.
10. Cover with a tarp if stored outside.