Bleeding gauge line – Great Plains PFC2000 Operator Manual User Manual
Page 19
Advertising
Preparation and Setup 17
03/28/2007
407-158M
Bleeding Gauge Line
When operating the tank for the first time air must be
bled from the hose of “Hi-Rate” fertilizer gauge line
.
Releasing air from this line makes the gauge reading
more reliable.
1.
Open the bleed valve
at the magnetic gauge on
the planter wing.
2.
Plant and fertilize until fluid is observed exiting the
dump line
.
3.
Stop planting, close the bleed valve, and resume
planting.
Figure 8
Gauge Bleed Valve
26149
1
2
3
Advertising
This manual is related to the following products: