Great Plains PFC2000 Operator Manual - Manual (Page 8)

6
407-158M 03/28/2007
Safety Decals
Safety Reflectors and Decals
Your implement comes equipped with all lights, safety
reflectors and decals in place. They were designed to
help you safely operate your implement.
▲ Read and follow decal directions.
▲ Keep lights in operating condition.
▲ Keep all safety decals clean and legible.
▲ Replace all damaged or missing decals. Order new
decals from your Great Plains dealer. Refer to this sec-
tion for proper decal placement.
▲ When ordering new parts or components, also request
corresponding safety decals.
To install new decals:
1. Clean the area on which the decal is to be placed.
2. Peel backing from decal. Press firmly on surface,
being careful not to cause air bubbles under decal.
818-055C
Slow Moving Vehicle Reflector
On the back of the cart, frame center;
1 total
838-266C
Red Reflectors
On the main frame back, each side;
two total
26016
26016