Great Plains DICKEY-john Down Pressure Control - Manual (Page 11)

OPERATOR’S MANUAL
Row-Pro Down Pressure Control
11001-1572-201008
OPERATION / 9
OPERATION
Constants defined at the Down Pressure Setup screen will monitor and
control down pressure and display on the Main Work screen when the
master switch is turned ON.
NOTE: Row-Pro Down Pressure is a
limited automatic adjustment
that works in conjunction
with the down pressure
springs. It does not
independently control the full
range of down pressure .
The Down Pressure data item has to be selected in the Work Screen
Configuration before appearing on the Main Work screen. Refer to Viewing
Down Pressure on Work Screen.
Figure 9
Main Work Screen with Down Pressure Enabled
1) Press the increase (+) button on the Main Work screen to increase the
target rate. The rate will change based on the increase setting defined at
the Setup screen.
2) Press the decrease (-) button on the Main Work screen to decrease the
target rate. The rate will change based on the decrease setting defined at
the Setup screen.
3) Down pressure bar graph indicators display the amount of force being
applied relative to the target rate defined at the Setup screen. Number of
bar graphs shown is based on the number of modules installed and inputs
enabled.
Figure 10
Down Pressure
40.5
Down
Pressure 147 147
1
2
3
127 111