Operator’s manual, Target rate, Increase/decrease rate – Great Plains DICKEY-john Down Pressure Control User Manual
Page 6: 4 / row-pro down pressure setup
OPERATOR’S MANUAL
Row-Pro Down Pressure Control
11001-1572-201008
4 / ROW-PRO DOWN PRESSURE SETUP
Disabled
The increase/decrease rate for front and rear row units is not linked and two
values must be entered at this screen. When disabled, two sets of
Increase/Decrease buttons appear on the Main Work screen that allows
adjustment of front and rear rates independently.
Figure 4
Front-Rear Linkage Disabled
TARGET RATE
Target rate is the desired amount of down pressure (lbs). The system will
monitor and adjust pressure to meet the defined rate set at this screen.
INCREASE/DECREASE RATE
The increase/decrease rate establishes a set amount of pressure change
for each increase/decrease. This value is applied to the target rate while on
the Main Work screen. Refer to Front-Rear Linked description for linking
front/rear row units.
(2) Increase/
Decrease
adjustments
for front
and rear
Down Pressure force
applied relative
to target
Increase
%
Decrease
%
Increase
%
Decrease
%
150
150
147
121
147
121