Great Plains 40P Assembly Instructions - Manual (Page 4)

118-811M 1/9/03
Great Plains Mfg., Inc.
Baffle Package Option 4
Refer to Figure 4
1. Loosen fasteners on left inside of left box (1)
as shown in figure 3. Place outer end box clip
(2) over bolts and retighten fasteners. Loosen
fasteners on right inside of left box and place
inner box end clip over bolts and retighten. Be
sure clips are pushed down on bolts. Assem-
ble the clips in the same manner for all boxes.
Refer to Figure 5
2. Line meter covers with foam seal all the way
around the edges.
3. Place meter cover over tube outlets not being
used. Place Seedtube corks in tubes at each
end of the box. See page 6 for placement.
Make sure there is a good seal to rear box
panel.
Refer to Figure 6
4. Use tarp strap to hold meter covers in place
by fastening one end to the box end clip pull-
ing it over the meter cover and hooking it to
the center divider.
Assembly Instructions for 118-827A Baffle Package
Fasteners
(1)
End Box
Clip (2)
Figure 6
Box Divider
Figure 5
Foam Seal and 4" Strips
Figure 4
Box Ends
19249
19275
19253