Great Plains TC5319 (S/N A1420X+) Parts Manual - Manual (Page 93)

Revision Comments Part Description Part No. Ref.
Image No. dwg43168
Models 5309, 5313 TUBE - 3 X 3 X 41 569-038D 1.
Models 5107, 5309, 5311, 5313 TUBE - 3 X 3 X 99 569-109D 1.
Models 5311 TUBE - 3 X 3 X 18 569-113D 1.
U-BOLT 5/8-11X3 1/32X4 1/2 SPT 806-183C 2.
WASHER LOCK SPRING 5/8 PLT 804-022C 3.
NUT HEX 5/8-11 PLT 803-021C 4.
CHOPPER MOUNT BRACKET 569-205H 5.
Includes items 9-15 CHOPPER HUB ASSEMBLY 569-204K 6.
WASHER LOCK SPRING 7/8 PLT 804-037C 7.
Rev. 2 NUT HEX 7/8-14 PLT 803-149C 8.
Rev. 1 Replaced by 803-149C NUT HEX 7/8-9 PLT 803-049C 8.
REAR SLEEVE 569-091D 9.
2.5 OD DUAL LIP GREASE SEAL 816-679C 10.
MACHINED HUB 569-090D 11.
DOUBLE ROLL BALL BEARING 822-258C 12.
Rev. 2 SPINDLE 569-092D 13.
62MM SNAP RING 800-407C 14.
EC STYLE END CAP 891-219C 15.
Includes items 5-8 CHOPPER ASSEMBLY 569-207L 16.
CHOPPER WHEEL WELDMENT 569-206H 17.
CHOPPER BLADE 3/8 X 4 1/2 X 5 820-442C 18.
PLOW BOLT, 7/16" x 1 1/2" #3 170724 19.
WASHER LOCK 7/16 PLT 804-014C 20.
NUT HEX 7/16-14 PLT 803-015C 21.
Includes items 17-21 CHOPPER WHEEL SUB ASSEMBLY 569-231S 22.
WASHER LOCK SPRING 1/2 PLT 804-015C 23.
HHCS 1/2-13X1 1/2 GR5 802-091C 24.
CHOPPER MNT - SINGLE RH 569-275H 25.
CHOPPER MNT - SINGLE LH 569-276H 25.
Includes items 6-8, 25 CHOPPER ASSEMBLY - SINGLE RH 569-273L 26.
Includes items 6-8, 25 CHOPPER ASSEMBLY - SINGLE LH 569-274L 26.
07/14/14 - 93 - 566-224P
Table of Contents Part Number Index
Section 8: Attachments
Chopper Reel Assembly (S/N GP-A1851X-)
(Applies to TC5109, TC5111, TC5113, TC5115, TC5313, TC5315, TC5317, TC5319, TC5321, TC5323 only)