Tongue assembly – Great Plains 1205NT Predelivery Manual User Manual
Page 12
Advertising
1205NT
150-131Q
3/24/06
10
9.
Check that all safety decals and reflectors are
located correctly and legible. Replace if im-
properly located or damaged. Refer to “Safety
Decals” in the operator’s manual.
10. Inflate tires to recommended pressure as list-
ed on the “Tire Inflation Chart,” page 17.
Tighten wheel bolts as specified on “Torque
Values Chart,” page 16.
Tongue Assembly
Figure 1
Tongue Installation
14041
See Figure 1. With the aid of a fork-lift, overhead
hoist or loader, lift the tongue (1) into place on the
front center of tongue mounting brackets (2) and
bolt it into place with the eight 3/4 x 6 x 5 3/4 inch
u-bolts (3), lock-washers (4) and nuts (5).
Figure 2
Tongue Location
10111
Use Figure 2 as a reference for tongue location.
Advertising