Great Plains 3P806NT Material Rate - Manual (Page 3)

2011-10-21 Table of Contents Main Box Rates 151-143B
Great Plains Manufacturing, Inc. Table of Contents Main Box Rates 1
Introduction
This manual is your guide to drill adjustments for
achieving specific seed populations.
Although some setup, operation and adjustment material
herein is repeated from the drill Operator Manual, you
need to be thoroughly familiar with drill operations and
adjustments before applying this Seed Rate Manual and
its table data.
Models Covered
This rate manual applies to drill models:
Document Family
Material Rates Overview
Details of seed and fertilizer rate setting are found in the
Adjustments section of the Operator Manual, and rely
on data from this Seed Rate Manual.
Rate setting controls are different for each box. Some
boxes have more than one control.
All chart rates, for all boxes, are approximate.
Great Plains strongly recommends calibration of each
box to the material to be applied.
3P806NT-1375 13-row 7.5-inch (19.1 cm)
151-143M Operator Manual
151-143P Parts Manual
151-143B Seed Rate Manual (this document) Figure 1
3P806NT No-Till Drill
28357
Main Box
Dual Seed
(page 3)
Small Seeds
(page 24)
Native Grass
(page 17)
Fertilizer
(page 29)
Rate Range
Rate Handle
Seed Rate Reduction
Rate Knob Coarse Rate Drive Type Drive Type
Fine Rate Rate Handle Driver/Driven
Cup Adjustment Door Handle