Great Plains Discharge Elbow Kit Hypro Pumps - Manual

Great Plains Mfg., Inc.
Installation Instructions 1
©Copyright 2007 Printed 03/01/2007 407-189M
Discharge Elbow Kit
Hypro Pumps
Used with:
• Model year 2006 and earlier pumps
General Information
These instructions explain how to install the Discharge
Elbow Kit. This kit replaces both original OEM single-part
elbows, and current 3-part elbows. The 3-part assembly
provides enhanced resistance to caustic chemicals.
These instructions apply to:
These instructions presume that the elbow to be
replaced is the older single-part style.
The existing flange or elbow may be attached to the
pump with removable nuts on threaded studs, or remov-
able bolts and nuts. These instructions presume nuts on
studs.
Note: Be careful not to drop or misplace the fasteners.
They are likely in metric sizing, and due to supplier
component changes over time, this manual is
unable to precisely specify their call sizes.
Before You Start
Each kit converts one pump.
For each kit, inventory the contents per the “Parts List”
on page 4.
Review the instructions, to make sure the steps are
understood and what tools are expected.
Have the following items at hand:
• Appropriate safety equipment, such as chemical
gloves, for working with the fertilizer chemicals most
recently pumped.
• Suitable location and equipment for flushing the fertil-
izer line at the pump.
• Original or updated Parts Manual for your implement
• Basic hand tools
• Pipe thread sealant suitable for polypropylene, such
as Rectorseal or Teflon® PTFE tape.
Notations and Conventions
callouts identify components in the currently
referenced Figure or Figures
to callouts reference new parts from the list on
page 4
to callouts reference existing parts. The
descriptions match those in your Parts manual.
Option Package Part Number
HYPRO PUMP DISCHARGE
ELBOW KIT
407-188A
Figure 1
Update Kit Components
26103
1
11 15
51 55