Great Plains Discharge Elbow Kit Hypro Pumps - Manual (Page 4)

Great Plains Mfg., Inc.
4 Discharge Elbow Kit
407-189M 03/01/2007
Mount Fittings on Pump
Refer to Figure 5
16. Using the saved nuts , attach the new fittings
to the pump. Orient the elbow to point upward.
17. Apply pipe sealant to the adaptor threads, and re-
attach the adaptor/fitting stack removed at step 7.
18. Place the hose removed at step 6 over the top fit-
ting and tighten the saved clamp.
Reference Information
Abbreviations
Parts List
New Parts Included in the 407-188A Discharge Elbow Kit:
Figure 5
Mount Fittings
26106
54
1
2
54 1
AD Adaptor
EL Elbow
ID Inside Diameter
NPT National Pipe Thread (Male/Female)
OD Outside Diameter
WRM DRV Worm Drive
Torque Values
Fastener/Fitting N-m Ft-Lbs
M5x0.8 Class 8.8 6 5
M6x1 Class 8.8 11 8
M8x1.25 Class 8.8 26 19
M8x1 Class 8.8 28 21
Callout Quantity Part No. Part Description
1 407-189M This manual
1 407-173D STAINLESS FITTING
1 816-045C O-RING 15/16 I.D. X 1-1/8 O.D.
1 830-041C AD 1/2MNPT POLYPROP
1 830-048C EL 1/2MNPT X 1/2FNPT POLYP
11
12
13
14
15
Great Plains Manufacturing, Inc.
Corporate Office: PO Box 5060
Salina, KS 67402-5060 USA