Great Plains FH6800HD Operator Manual - Manual (Page 19)

04/28/2014 564-070M
Great Plains Manufacturing, Inc. 15
Operating Instructions
This section covers general operating procedures. Expe-
rience, machine familiarity, and the following information
will lead to efficient operation and good working habits.
Always operate farm machinery with safety in mind.
Pre-Start Checklist
Perform the following steps before transporting the flex
harrow to the field.
This checklist presumes that the nurse tank is not yet
connected.
❑ Carefully read “A.Important Safety Information” on
page 1.
❑ Lubricate flex harrow as indicated under “Lubrica-
tion and Scheduled Maintenance” on page 29.
❑ Check all tires for proper inflation. See “Tire Infla-
tion & Warranty” on page 33.
❑ Check all bolts, pins, and fasteners. Torque as
shown in “Torque Values Chart” on page 34.
❑ Check flex harrow for worn or damaged parts. Repair
or replace parts before going to the field.
❑ Check hydraulic hoses, fittings, and cylinders for
leaks. Repair or replace before going to the field.
High Pressure Fluid Hazard:
Relieve pressure and shut down tractor before connecting, dis-
connecting or checking hydraulic lines. Use a piece of paper
or cardboard, NOT BODY PARTS, to check for leaks. Wear
protective gloves and safety glasses or goggles when working
with hydraulic systems. Escaping fluid under pressure can
have sufficient pressure to penetrate the skin causing serious
injury. If an accident occurs, seek immediate medical assis-
tance from a physician familiar with this type of injury.