Great Plains FH6800HD Operator Manual - Manual (Page 25)

Great Plains Manufacturing, Inc. Operating Instructions 21
04/28/2014 564-070M
Short-Term Parking
1. Choose an implement parking location with level firm
ground. Do not unhitch on a steep slope.
2. Fold harrow (page 19).
3. Engage transport lock chains (page 16)
4. Install jack stand on tongue (page 13).
5. Use parking jack to neutralize tongue weight at trac-
tor hitch.
6. Set hydraulic circuits to neutral.
7. Disconnect hydraulic lines. Secure them so that they
do not touch the ground.
8. Disconnect lighting connector, capping where provi-
sioned.
9. Disconnect safety chain.
10. Unhitch. Restart tractor and pull away from flex har-
row.
Long-Term Storage
1. Clean flex harrow of mud, dirt, excess oil and grease.
2. Lubricate all points listed in Maintenance.
3. Apply grease to exposed cylinder rods to prevent
rust.
4. Inspect flex harrow for worn or damaged parts. Make
repairs and service during off season.
5. Use spray paint to cover scratches, chips, and worn
areas on the flex harrow to protect the metal.
6. Park implement per “Short-Term Parking” above.
Figure 13
Harrow Parked
31748