Great Plains FCP1000 Assembly Instructions - Manual

1
Installation Instructions
Great Plains Mfg., Inc.
© Copyright 1999 Printed 5/25/06
Used with:
•
•
148-449M
CP1000 & FCP1000
Folding Markers
CP1000
FCP1000
General Information
These instructions explain how to install the dual folding mark-
ers. The marker disks leave a line for the drill operator to follow
on the next field pass. The markers fold and unfold hydraulically
for field operation. The markers are plumbed together through a
sequence valve and operated on one hydraulic circuit.
These instructions apply to:
148-430A CP1000 and FCP1000 Dual Markers
Manual Update
Refer to the drill operator’s manual for detailed information on
safely operating, adjusting, troubleshooting and maintaining the
folding markers. Refer to the parts manual for part identification.
• CP1000 Operator’s Manual . . . . . . . . . . . . . . . . . .148-358M
• CP1000 Parts Manual . . . . . . . . . . . . . . . . . . . . . . 148-358P
• FCP1000 Operator’s Manual . . . . . . . . . . . . . . . . .148-693M
• FCP1000 Part Manual . . . . . . . . . . . . . . . . . . . . . . 148-693P
Before You Start
Pages 5 and 6 are detailed listing of parts included in the folding
markers package. Use these list to inventory parts received.
Definitions
The following terms are used throughout this manual.
Right and left as used in this manual are determined by facing
the direction the machine will travel while in use unless otherwise
stated.
NOTE: Useful information about the preceding topic.
IMPORTANT: A crucial point of information about the pre-
ceding topic. For safe and correct operation, read and fol-
low the directions provided before continuing.
When you see this symbol, the subsequent instructions and
warnings are serious - follow without exception. Your life and
the lives of others depend on it!
!!