Great Plains Blockage Monitor Assembly Instructions - Manual (Page 4)

4 Air Drill Blockage Monitor 168-258M 4/8/04
Great Plains Mfg., Inc.
Assembly
9. Connect one module to monitor
head. Connect three wires from
monitor head to three pins on right-
hand side of connector panel. Match
data input/output, ground and +12
volt wires to DATA, GND and +12V
pins.
10. Connect all other modules to each
other, connecting the data, +12 volt
and ground wires to the matching
pins on each connector panel. Con-
nection order between modules is
not critical.
18094
18095