Great Plains 4000TM Predelivery Manual - Manual (Page 29)

Great Plains Manufacturing, Inc. Assembly 25
03/19/2014 586-537Q
Front Lights & SMV
Refer to Figure 21
Note: See layout drawings in Appendix for proper light bracket
placement. If machine is equipped with a rear attach-
ment the rear light brackets will need to be mounted to
the rear tube of the center drag frame. The SMV sign will
be shipped in a bag and will need installed on the rear of
the machine.
81. Remove u-bolts from light brackets. Install the RF/LR
and LF/RR light brackets with the 1/2 x 3 1/32 x 6 u-
bolts , 1/2 lock washers and 1/2 nuts.
82. Attach the SMV sign to the rear of the smv bracket
with 1/4 x 3/4 pan head screws , 1/4 lock washers and
1/4 nuts.
83. Tighten all bolts to specs, See “Torque Values Chart” on
page 35.
Rear Lights
Refer to Figure 22
Note: See layout drawings in Appendix for proper light bracket
placement. If machine is not equipped with a rear at-
tachment the rear light brackets will need to be mounted
to the rear tube of the center frame with 1/2 x 3 1/32 x 6
u-bolts.
84. Remove u-bolts from light brackets. Install the RF/LR
and LF/RR light brackets with the 1/2 x 3 1/32 x 4 u-
bolts , 1/2 lock washers and 1/2 nuts.
85. Tighten all bolts to specs, See “Torque Values Chart” on
page 35.
Figure 21
Front Lights & SMV
42888
4
6
5
1
3
2
1
2
3
4 5
6
Figure 22
Rear Lights
42889
2
3
1
1
2
3