Great Plains DICKEY-john AI-120 - Manual (Page 13)

Once you get here you must read the screen
and make sure you are ready to continue.
Next touch OK.
After you are done then touch the
Work Screen to return home.
Select the Control On button to
engage the Planter .
*Note. Make sure that the planter is in the
ground and you are ready to plant.
Engaging planter hydraulic drive
Two ways to do this.
Option 1
Using the “soft key” on the screen.
**** All “soft key” (touch screen
buttons) that control a function are
buttons of intent!! This means that if
you want to turn your planter on you
must touch.
This is explained on the
last page in this section.
If you wish to shut it off you must
touch
Sec. 8
2012-12 13 401-909M