Great Plains 6548 Series VII Field Cultivator-Floating Hitch Parts Manual - Manual (Page 17)

Revision Comments Part Description Part No. Ref.
Image No. dwg00405
GAUGE WHEEL ARM MOUNT 575-558H 1.
GAUGE WHEEL ARM MOUNT SPL- RH 575-668H 2.
(shown) GAUGE WHEEL ARM MOUNT SPL- LH 575-669H 2.
GAUGE WHEEL ARM (TOP) 575-554H 3.
WING GAUGE WHL ARM BTM RH 575-663H 4.
(shown) WING GAUGE WHL ARM BTM LH 575-664H 4.
LEVELING LINK 575-557H 5.
Rev. 1 Includes items 7-8 & 10-11 TURNBUCKLE ASSEMBLY 575-541S 6.
TURNBUCKLE TUBE 575-530H 7.
TURNBUCKLE CLEVIS 575-564H 8.
1 1/4 X 1 X 3/4 HDR BUSHING 890-143C 9.
Rev. 2 Requires 805-351C Pin, item 20 TURNBUCKLE CLVS END 1 1/2-RH 576-110H 10.
Rev. 1 RPBY 575-528V 575-528H 10.
NUT HEX JAM 1 1/2-6 PLT 803-063C 11.
WING LEVEL BAR 575-665H 12.
PIN CLEVIS 1 X 3 3/8 USABLE 805-351C 13.
WASHER FLAT 1 USS PLT 804-028C 14.
WASHER MACH 1.5X1.00X.075 804-192C 15.
PIN COTTER 3/16 X 2 805-058C 16.
1 x 5 1/2" SP GREASABLE BOLT 575-035D 17.
NUT HEX 1-8 NYLON INSERT PLT 803-038C 18.
HHCS 1-8X6 GR8 PLT SPCL THREAD 802-715C 19.
Rev. 2 PIN CLEVIS 1 X 3 3/8 USABLE 805-351C 20.
Rev. 1 Changed to 805-351C PIN CLEV 1X2 3/8 USE MUSHRM HD 805-352C 20.
U-BOLT 3/4-10X3 1/32X5 3/8 806-200C 21.
WASHER LOCK SPRING 3/4 PLT 804-023C 22.
NUT HEX 3/4-10 PLT 803-027C 23.
1 1/4 X 1 X 3/4 HDR BUSHING 890-143C 24.
12/09/09 - 17 - 560-205P
Table of Contents Part Number Index
Section 2: Frames
Wing Caster Wheel Linkage Assembly
(Applies to 6330FC F H, 6332FC F H, 6537FC F H, 6539FC F H, 6541FC F H, 6544FC F H, 6546FC F H, 6548FC
F H only)