Amico Valve Alarm Combo Unit - Manual (Page 31)

Appendix F
Technical Specifications
Supply Voltage: 115 to 220 VAC - 50 to 60 Hz
Current Draw: 1 Amp. Max.
Fuse (1/4 * 1-1/4): Fast Blow 1 Amp.
Cable Requirements
AVC Display Module to Remote Sensor:
Distance: Maximum 2,500 feet (750 m)
Cable: Belden # 8451 or equivalent.
#22 gauge shielded, twisted pair (For multiple sensors a multi-conductor shielded
twisted pair cable should be used).
Signal: 30 VDC - 1.0 Amps.
60 VDC - 0.3 Amps.
125 VAC - 0.5 Amps.
AVC Display Module to Master Module
Distance: Maximum 10,000 feet (3,000 m)
Cable: Minimum #22 gauge wire (does not have to be shielded, twisted pair)
Signal: 5 VDC, < 5 µA
www.amico.com 31