Bio-Rad Trans-Blot® Turbo™ Transfer System - Manual (Page 7)

Safety Compliance
This instrument has been tested and found to be in compliance with all applicable requirements of the
following safety and electromagnetic standards:
• EN61010-1 Electrical Equipment for Measurement, Control, and Laboratory Use
• UL STD No. 61010A-1 Electrical Equipment for Measurement, Control, and Laboratory Use, Part 1:
General Requirements
• CAN/CSA C22.2 No. 61010-1-04 Safety Requirements for Measurement, Control, and Laboratory
Use, Part 1: General Requirements (includes Amendment 1)
• IEC 61010-1 Safety Requirements for Measurement, Control, and Laboratory Use, Part 1 General
Requirements
Electromagnetic Compatibility (EMC)
EN61326 Class A Electrical Equipment for Measurement, Control, and Laboratory Use, General
Requirements
FCC Warning and Notes
Warning: Changes or modification to this unit not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.
This Bio-Rad instrument is designed and certified to meet EN61010* and the EMC requirements of
EN61326 (for class A) safety standards. Certified products are safe to use when operated in accordance
with the instruction manual. This instrument should not be modfied or altered in any way.
Alteration of this instrument will:
• Void the manufacturer’s warranty
• Void the EN61010 safety certification
• Create a potential safety hazard
* EN 61010 is an internationally accepted electrical safety standard for laboratory instruments.
Bio-Rad Laboratories is not responsible for any injury or damage caused by the use of this instrument
for purposes other than those for which it is intended, or by modifications of the instrument not
performed by Bio-Rad Laboratories or an authorized agent.
We strongly recommend that you follow the safety specifications listed in this section and throughout
this manual. Use only the supplied power cord with the instrument, making sure to choose the plug
adaptor that corresponds to the electrical outlets in your region.
Tech Support: 1-800-424-6723 • www.bio-rad.com v
Trans-Blot® Turbo™ Blotting System