Bio-Rad Trans-Blot® Turbo™ Transfer System - Manual (Page 9)

Specifications
Trans-Blot® Turbo™ Instrument
Dimensions: (L x W x H) 26.0 x 21.1 x 20.4 cm
Weight: 8 lb with cassettes, 4.5 lb without cassettes
Input power: 100–240 VAC, 276 VA, 50–60 Hz, 175 W max
Fuses: Two 6.3 A, 250 V, fuses located above the power connection
On/off switch: Yes, mains connected
USB port: Yes, input only, for firmware updates
Cooling fan: Yes
Output power: 0–26 VAC (1 V increments), 0–2.6 A DC (0.1 A increments) for each cassette
Operating conditions: 15–31°C ambient temperature, 0–95% relative humidity (noncondensing)
User Interface
18 button keypad, 128 x 64 pixel monochrome display
Programmable methods: Up to 25 user defined
Preprogrammed methods: Standard SD, 1.5 mm gels, High MW, Low MW, Mixed MW, 1 Mini-PROTEAN®
TGX™ gel
Audible alarm: Yes
User notifications:
• Power fail during run
• No load detection
• No cassette detection
• End of run
• Watt/hr limit
Trans-Blot Turbo Cassettes
Dimensions: (L x W x H) 20.2 x 16.0 x 4.5 cm
Anode: Platinized titanium electrode plate
Cathode: Stainless steel
Weight: 1.5 lb
Gel Compatibility
Suitable for transfer of two mini format gels or one midi fomat gel per cassette. Other gel sizes can be
trimmed to fit the consumable transfer packs.
Tech Support: 1-800-424-6723 • www.bio-rad.com vii
Trans-Blot® Turbo™ Blotting System