Yamaha LS9 - Manual (Page 141)

141
Using the Recall Safe function
LS9-16/32 Owner’s Manual
13
Scene memor
y
3
If you want to enable Recall Safe for spe-
cific parameters of the selected channel,
make the following settings in the SAFE
PARAMETER field.
● For an input channel
Use the buttons in the lower part of the SAFE
PARAMETER field (except for the “ALL” button) to
select the parameters that will be subject to Recall
Safe (multiple selections are allowed). If you want all
parameters to be subject to Recall Safe, turn on the
ALL button (this is the default setting).
These buttons correspond to the following parameters.
● If a STEREO/MONO channel is selected
With the exception of the types of button that are dis-
played, this is the same as for an input channel.
These buttons correspond to the following parameters.
● If a MIX channel is selected
Use the buttons in the lower part of the SAFE
PARAMETER field (except for the “ALL” button) to
select the parameters that will be subject to Recall
Safe (multiple selections are allowed).
In addition, you can use the WITH MIX SEND button
to enable Recall Safe for the on/off status and send
level of the signals sent from input channels to MIX
buses.
If you want all parameters shown in the lower part of
the field to be subject to Recall Safe, turn on the ALL
button (this is the default setting).
Button name Corresponding parameters
ALL All parameters
HA Head amp settings (including external HA)
EQ EQ settings (including ATT/HPF)
DYNA 1 Dynamics 1 settings
DYNA 2 Dynamics 2 settings
MIX ON On/off status of signals sent to MIX buses
MIX SEND Send levels of signals sent to MIX buses
FADER Fader positions
CH ON On/off status of [ON] keys
LS9-16
LS9-32
• If you turn on the ALL button, all other buttons of the SAFE
PARAMETER field will be turned off.
NOTE
Button name Corresponding parameters
ALL All parameters
EQ EQ settings (including ATT)
DYNA 1 Dynamics 1 settings
MTRX ON On/off status of signals sent to MATRIX buses
MTRX SEND Send levels of signals sent to MATRIX buses
FADER Fader positions
CH ON On/off status of [ON] keys