Checking for shut eyes, Cop y – Canon PowerShot SX30 IS User Manual
Page 101
Checking for Shut Eyes
101
Make the setting.
●
Press the
qr buttons or turn the  dial to
choose the amount of flash output, then
press the
m button.
X
Once set,
~ will appear on the screen.
When the camera detects the possibility that people have their eyes shut,
appears.
Choose [Blink Detection].
●
Press the
n button, then choose
[Blink Detection] in the
4 tab. Press the
qr buttons to choose [On].
Shoot.
X
When a person with shut eyes is detected,
a frame and
appear.
•
You can also set the flash output. Press the
n button and choose
[Flash Control] (p. 98) from the
4 tab. Then choose [Flash Output] and
press the
qr buttons to choose a setting.
•
In
M and B modes, you can set the flash output if you press the
n button and choose the 4 tab, then [Flash Control] and set the
[Flash Mode] option to [Manual].
•
When you press and hold the
h button for 1 sec. or more, or with the
flash raised, if you press the
h button and immediately press the n
button, the settings screen will appear.
Checking for Shut Eyes
•
In
or
$ mode, when the number of shots is set to two or more, this
function is only available for the last image shot.
•
In
and
modes, this function is only available for the last image
shot.
•
Not available in
W, ,
or
mode.
COP
Y