Canon PowerShot SX30 IS - Manual (Page 167)

Using the Lens Hood (Sold Separately)
167
When shooting a wide-angle photo that is backlit without using a flash, we
recommend attaching Lens Hood LH-DC60 to reduce the amount of
extraneous light entering the lens.
Attach the hood.
● Align the notch ( ) on the lens hood with
the mark on the camera ( ), and turn the
lens hood in the direction of the arrow until
locked.
● To remove the lens hood, turn it in the
opposite direction.
● When not in use, align the notch ( ) on
the hood with the mark on the camera
(
), and turn the hood in the direction of
the arrow until locked as shown.
Do not unplug the plug or power cord with the camera turned on. This
could erase images you have taken or damage the camera.
Using the Lens Hood (Sold Separately)
If you use the built-in flash with the hood attached, portions of the image
may appear darker.
COP
Y