Canon PowerShot SX30 IS - Manual (Page 124)

124
You can magnify the area of a recorded image that was inside the AF Frame,
or the area of a face that was detected, to check the focus.
Press the l button to switch to
the focus check display (p. 47).
X A white frame will appear where the AF
frame or face was when the focus was set.
X A gray frame will appear on a face
detected during playback.
X The area within the orange frame appears
magnified.
Switch frames.
● Move the zoom lever toward k once.
X The screen shown to the left will appear.
● Press the m button to move to a different
frame when multiple frames appear.
Change the magnification level or
location.
● Use the zoom lever to change the display
size, and the
opqr buttons to change
the display position while checking the
focus.
● Pressing the n button resets the
display to Step 1.
Checking the Focus
COP
Y