Canon PowerShot SX30 IS - Manual (Page 166)

166
If you use AC Adapter Kit ACK-DC50 (sold separately), you can use the
camera without worrying about how much charge is left in the battery.
Turn off the camera.
Plug the cord into the coupler.
● Fully insert the plug into the coupler.
Insert the coupler.
● Follow Step 2 on p. 17 to open the cover,
then insert the coupler as shown until it
locks into place with a click.
● Close the cover ( ), and press downward
as ( ) you slide it until it clicks into place
( ).
Connect the power cord.
● Connect the power cord to the compact
power adapter, then plug the other end into
a power outlet.
● Turn the camera on to use it.
● After you finish, turn off the camera and
unplug the power cord from the power outlet.
Using Household Power
Terminals
Cord
COP
Y