Humboldt H-3185B CONTROLLER User Manual
Page 21
Advertising
- 21 -
© 2008 Humboldt Manufacturing
required in the cycle, return to the main operating mode by pressing and holding
down the Menu button
until the red display reads the current temperature.
Ramp time 2 is preset to 5 minutes. Soak level 2 is preset to 40°F. Soak time 2 is
preset to 0. The remaining 6 ramp times are preset to 0. If the ramp time is set to
0, the ramp will be skipped.
6.0 Service
For any service issues, contact Humboldt Scientific, Inc. at 1-800-537-4183 between 8:00
AM and 5:00 PM Eastern Time.
Advertising