Dako Autostainer - Manual (Page 16)

Initialize
The Initialize screen is used to establish and update default information for the system.
This includes the institution information, Autostainer serial number, user names, the
doctors requesting IHC tests, a library of tissues that may be used during staining, the
default volume and the drop zone for reagent dispensation, and the number of slides
allowed between routine cleaning runs. Slide and reagent label formatting, user-defined
printing formats for the Programming Grid, and IHC Reports can also be configured
from this screen.
Label Printing Initialization
The Slide Labels and Reagent Labels buttons are displayed on the Initialize screen
and are used to access the Design Label screens for configuring and adjusting slide
and reagent label printing.
Slide Labels
The Slide Labels button is displayed on the Initialize screen and it is used to access
the Design Slide Label screen for configuring and adjusting slide label printing. Slide
labels are printed from the Print button on the Programming Grid. Do not print labels
while the Autostainer is operating.
1. Select the Slide Labels button.
Note: If Slide ID, Doctor, or Tissue is selected to print on the label, then these items
must be selected from the Options button in the Initialize screen. If these
Programming Grid items are not selected by using the Options button in the
Initialize screen, then these fields will not be present in the Slide Information
screen.
8 Autostainer Handbook