Dustless DustDroid 600 - Manual (Page 10)

dustlesstools.com 800.568.3949
10
DustDroid™ 600 & DustPro™ 600 HEPA Industrial Vacuums
Maintenance and Inspection
Special attendance and regular maintenance of the machine and its parts are imperative for functioning and safety.
In order to prevent unnecessary downtimes it is recommended to keep original spare and wear parts on stock.
The following should be kept on hand and replaced at least every 1000 hrs of operation. Upon inspection, if damage noticed to filter,
replace immediately.
Part # FRT155 HePA Filter Cartridge (2 / unit)
Part # vMA120brushset Motor Brushes (2 sets / unit)
Daily Maintenance _________________________________________________________________
The following maintenance should take place before and after every operation of machine:
1. Clean all surfaces with a dry, lint free cloth
2. Inspect all electrical cables for cuts and replace damaged chords
3. Check all electrical connections are secure and snug
4. Inspect filter for any visible damage
5. Inspect motor exhaust area to insure no dust has been blowing out
Maintenance and Inspection _________________________________________________________
Daily — Prior to Operation
• Check the electric connections for sediments of dirt or foreign bodies.
• Check the reservoirs to insure the bags have been changed.
• Check the filters for any physical damage and replace if necessary.
• Remove dust plastic bags from dust reservoirs.
• Check all electrical cables for cuts or damage.
• Check the hose connections for tightness and fixed seat.
• Check the hoses to the filter lid for damages.
• Make sure the lid seals are in good condition and the lids seat well.
• Check the latches on the lids and adjust accordingly.
• Check the casters for debris and make sure they are in good working condition.
If machine is not collecting dust at an adequate level to meet all local regulations and job
requirements shut down vacuum system and the machine it is hooked to immediately and
perform repairs and maintenance procedures.