Dustless DustDroid 600 - Manual (Page 5)

dustlesstools.com 800.568.3949
5
Inspection intervals and intervals for recurring checks specified in these Operating Instructions must be complied with. At the same
time it is necessary to meet the legal requirements.
To perform maintenance work correctly it is important to be equipped with proper tools for the task in question.
The location and the operation of fire extinguishers must be made known on each building site!
Take note of the facilities for fire reporting and fighting fires!
Personnel Selection and Qualification __________________________________________________
Fundamental duties:
Only reliable personnel are allowed to work on the machine
Only trained personnel can be used to operate the machine. Note the statutory minimum age! Specify clearly the responsibilities of
personnel for operation, setting up, servicing and maintenance work!
Make sure that only authorized personnel operate or work on the machine.
Select clearly the machine operator. Define his/her responsibilities also with regard to traffic safety regulations and empower him/
her to decline instructions from third parties which are not complying with the safety requirements.
Personnel being trained or made acquainted with the equipment may only be deployed under constant supervision of an experienced
person.
Safety Precautions Applicable to Different Operating Conditions _____________________________
Avoid any method of working that impairs safety! All precautions have to be taken, that the machine will only be used in a safe and
functional status.
The machine has to be checked visually at least once a day for any damage and defects.
In the event of operational malfunctions the machine must be shut down immediately and secured. The fault must be rectified before
starting the machine again!
Fault must be rectified immediately!
Start up and switch off operations and control devices have to be handled in accordance with the Operating Instructions.
Use only extension cables for extending the main cable that are sized and marked in accordance with the overall power consumption
of the machine and the valid local guidelines.
Safety Instructions
(con’t)
Secure the work area around the machine in public areas providing a safety distance of at least
10 feet around the machine.
Work on the electrical parts of the equipment may only be undertaken by a skilled electrician
or by a trained person under the guidance and supervision of a skilled electrician as well as in
accordance with the electrical engineering regulations.
All persons in the proximity of the machine must wear safety glasses with lateral protection.
ear protection may be required.