Technical data – Dustless DustDroid 600 User Manual

Page 3

Advertising
background image

dustlesstools.com 800.568.3949

3

Rating ___________________________________________________________________________

Machine:

DustDroid™ 600 For Fine Dust - Concrete or DustPro™ 600 For Wood Floor Sanding

Machine-Type: Model 600
Manufacturer: Dustless Technologies

(800) 568-3949

www.dustlesstools.com

Unit Specifications _________________________________________________________________

Dimensions:

Length 57 in 145 cm

Width 27 in 68 cm

Height 60 in 152 cm

Weight 284 lbs. 129 Kg

Connected loads of the electrical system: Power (2) 2.1 HP Motors
electrical Connection 120/240v 50-60Hz Single Phase – (the above is a typical generator style wiring setup) note: see wiring diagram

in this manual under Reference Guide and Procedures section of this manual.
The above connection creates two 120v connections that connect to each individual motor circuit. User may use 2 separate 120v

circuits off house power as an option as opposed to wiring the 120/240v.

Operative Range and Correct Usage ____________________________________________________

The Dustless Systems Model 600 is designed to be used for the purpose of collecting nonvolatile, noncombustive and

nonhazardous material. The machine cannot be used for other purposes. The manufacturer will not be liable for

damages resulting from such incorrect usage. In case of wrong usage the user is responsible for all risks.

Stand–by Power Supply (Generator) __________________________________________

If the Dustless Systems Model 600 is operated using a generator, the generator must be operated in accordance with the

current local electrical directives (this applies in special to the protective ground conductor) in order to ensure that

all safety devices are functioning and to be able to eliminate possible damage to electrical components.

Advice for Operators of Dust Collection System _________________________________

During the operation of the Dustless Systems Model 600 it may be possible to exceed the acceptable noise level of 85

dB(A). This is dependent on the different locations and the local circumstances. When the noise level is 85 dB(A)

or more, the machine operator and the persons working near the machine must wear sound–insulating devices.

Machine Type Designation __________________________________________________

Machine Type: Dustless Systems Model 600
Working Width: 30 in / 72 cm
Dust Capacity: 25 gallon to bottom of cyclone when in place
Dust Hose Connection: 3 in / 8 cm

Technical Data

Advertising