Dustless DustDroid 600 - Manual (Page 7)

dustlesstools.com 800.568.3949
7
Electrical Engineering Regulations ____________________________________________________
Never start machine in the tilted position. The machine must only be started when machine is standing
flat on work surface.
Work on the electrical parts of the equipment may only be undertaken by a skilled electrician or by a trained person
under the guidance and supervision of a skilled electrician as well as in accordance with the electrical engineering
regulations.
Use only extension cables for extending the main cable that are sized and marked in accordance with the overall
power consumption of the machine and the valid vDe guidelines. In case there is any question ask the manufacturer or
a skilled electrician.
If work on electrified parts is necessary, a second person must be deployed who can pull out the plug in an emergency. The working
area must be sealed with a red and white safety chain and a danger sign. Use tools that are insulated against voltages.
Only start work, once you are familiar with the electrical engineering regulations that apply to your area.
Only use voltage testers that comply with the regulations when troubleshooting. From time to time check voltage tester to ensure
that they are operationally efficient.
Special Instruction
Use only proper and default free tools for your work. Damaged tools have to be repaired immediately or to be replaced.
Use during your work for your own safety the required safety equipment and safety clothes (e.g. safety glasses, safety shoes, safety
gloves).
Please instruct your operators and the repair personnel about the following points:
• Cleaning and repair work are only allowed if the machine is shut off (safely in the off position).
• During work on the machine, be certain that the machine cannot be started.
• Replace all safety covers and devices after cleaning, repair, and maintenance work.
• Before restarting machine, make sure all personnel are a safe distance away from the work area after initial start up.
Safety Instructions
(con’t)