Time, date and consecutive number – Cardinal Industries 225 WEIGHT INDICATOR User Manual

Page 35

Advertising
background image

TIME, DATE AND CONSECUTIVE NUMBER

12-Hour Clock Format Selected in Setup (

TIME=12)

1. With the indicator in normal operations mode, press the TIME/DATE key.

2. The display will change to show

TIME=XXXXXX, where XXXXXX is the current time.

3. If the time displayed is correct, press the ENTER key and proceed to step 5.

4. Otherwise, using the numeric keys, enter the correct time (HHMMSS) and then press

the ENTER key.

IMPORTANT! Note that with a 12 hour clock format, 8:30 AM or 8:30 PM are entered
the same way, as 083000. The next prompt (

AM=) determines whether AM or PM is

printed on the ticket.

5. The display will change to show

AM=XXX, where XXX is current setting (YES or NO).

6. If the setting displayed is acceptable, press the ENTER key and proceed to step 8.

7. Otherwise, press YES or NO (on the soft keys) and then the ENTER key to save the

new setting and proceed to the next prompt.

8. The display will change to show

DATE = XXXXXX. Note that XXXXXX is the current

date displayed in the format selected during Calibration and Setup. See the

USA=

parameter in SETUP MENU #1.

9. If the date displayed is correct, press the ENTER key and proceed to step 11.

10. Otherwise, using the numeric keys, enter the correct date (in the format selected during

Calibration and Setup, MMDDYY or DDMMYY) and then press the ENTER key.

11. The display will change to show

CNC NO=XXXXXX, where XXXXXX is the current

consecutive number.

12. If the consecutive number displayed is correct, press the ENTER key to return to normal

operations.

13. Otherwise, using the numeric keys, enter the new consecutive number (6 digits max.)

and then press the ENTER key to return to normal operations.


8200-M538-O1

y 225 Installation

Page 31

Advertising