Warning: for safe use – Freedom Designs Freedom CGX User Manual

Page 12

Advertising
background image

FREEDOM DESIGNS, INC.

2241 Madera Rd. Simi Valley, CA. 93065 800-331-8551 Fax 888-582-1509

www.freedomdesigns.com

10

a fall or tip-over is likely.
5. Be aware that the impact of dropping down from a curb or step can damage

your chair or loosen fasteners.


If you fail to heed these warnings, damage to your chair, a fall, tip-over, or
loss of control may occur and cause severe injury to the rider or others.

Stairs and Escalators

1. NEVER use this chair on stairs UNLESS you have someone to help you.

Doing so is likely to cause a fall or tip-over.

2. Persons who help you should read and follow the warnings “For Attendants”,

(page 6) and the “For Safe Use”, (pages 10—12).

3. NEVER use this chair on an escalator, even with an attendant. If you do, a fall

or tip-over is likely.

If you fail to heed these warnings, damage to your chair, a fall, tip-over, or
loss of control may occur and cause severe injury to the rider or others.

WARNING: FOR SAFE USE


Before you assist a rider, be sure to read the warnings “For Attendants” (page 6)
and follow all instructions that apply. Be aware that you will need to learn safe
methods best suited to your abilities.

Transport Use

1. If possible and feasible, the rider should transfer to the OEM vehicle seat and

use the vehicle restraint.

2. If the wheelchair is used for transport, it must be used in a forward-facing

seating position.

3. The ANSI/RESNA WC/19 standards apply to persons with a weight of 51 to

169 lbs. This constitutes the range of sizes for which the

wheelchairs are

suitable for occupancy in a motor vehicle.

4. The Freedom CGX™

picture (right) shows the location of the wheelchair

securement points.

5. Use only with Wheelchair Tiedown and Occupant Restraint Systems (WTORS)

that have been installed in accordance with the manufacturer’s instructions and
SAE J2249.

6. Attach WTORS to securement points in

accordance with the manufacturer’s
instructions and SAE J2249

7. Attach occupant restraints in accordance

with the manufacturer’s instructions and SAE
J2249.

Note:

To obtain a copy of SAE J2249

Wheelchair Tiedown and Occupant Restraints
Systems for Use in Motor Vehicles, please
contact:

SAE International—400 Commonwealth Drive—Warrendale, PA 15096

(412) 776-4970


If you fail to heed these warnings, damage to your chair, a fall, tip-over, or
loss of control may occur and cause severe injury to the rider or others.

W

A
R
N

I

N

G

!

Advertising